2015年8月25日星期二

Tungsten alloy has a very broad application prospects, performance greatly improved

Tungsten alloys have good high-temperature strength, hardness, conductivity and corrosion resistance, and therefore have broad application prospects in the electric processing. high density Tungsten alloy Balls manufacture a wide range of electrical equipment, such as: electric upsetting anvil material, electric riveting the rivet material, EDM electrode materials, welding materials, high-voltage switch electrical contact materials.
In machinery, instrumentation manufacturing balancing element is used, such as the installation of tungsten alloy rod on the oil rig weights can greatly increase the degree of vertical drilling, improve the efficiency of oil drilling depth. High temperature properties of tungsten alloy die casting industry so that it can serve as a good mold material.
Because tungsten alloy X-ray attenuation of competence, and is used as an ideal material for a variety of radioactive source shielding element or container. Used to do in the medical radiation shielding material and γ-ray knife.
In sports, the Tungsten alloy radiation shielding materials racing car's performance can be greatly improved. Golf and tennis are bordered edge tungsten alloy counterweight, can have a stronger ability to attack racket; heavy arrows in the game, when the arrow tungsten alloy, can greatly improve the hit rate of the heavy arrows.
Because of similar density tungsten alloy and gold density, so at the souvenir and jewelry industry are used to make rings, necklaces and coins and the like. Electronic communications industry used to do BP machines, mobile phones transducer material. In addition, it is widely used in the fishing industry and fishing sinkers and manufacturing.

2015年8月22日星期六

Tungsten alloy car What are the characteristics

Heavy alloy Tungsten alloy Balance Weight) material is a kind of matrix of Tungsten Nickel Copper Alloys (W content of 85-99%), and added with Ni, Cu, Co, Mo, Cr and other elements of the alloy. Press alloy composition characteristics and uses are divided into W-Ni-Fe, W-Ni-Cu, W-Co, W-WC-Cu, W-Ag and other major series, having a density of up to 16 .5-19.0g / cm3, and is the world known high proportion alloy, it has a series of excellent properties, than the major: general proportion of high 16.5-18.75g / cm3 ,, strength: tensile strength of 700-1000Mpa, a strong ability to absorb radiation: its capacity than Lead 30-40%, the thermal conductivity coefficient: 5-fold mold steel; thermal expansion coefficient is small: Only iron or 1 / 2-1 / 3, good conductive properties of steel; has good weldability and formability ʱ?? Given the high proportion alloy has the above excellent features, it is widely used in aerospace, aviation, military, oil drilling, electrical instrumentation, medical and other industries.

2015年8月19日星期三

What is tungsten alloy crank?

Crank, is part of an engine, it is converted into a linear reciprocating motion of the piston to rotate.
Crankshaft how to run?
A piston rod connected to the crankshaft and the bearing, when the piston moves up and down, crank operation, rod and bearing a circular motion, then began to spin the crankshaft.
Advantages of tungsten alloy square bar
In the engine, it is necessary to keep the use of the counterweight reciprocates each piston connecting rod and balance, and these are usually as part of the crankshaft. Lead is cheap, but lower than the density of high density Tungsten alloy Balls, and not environmental protection, but for steel, tungsten alloy density is more than twice that, so compared with other materials, because of the following characteristics, Tungsten based heavy metal alloys is certainly the most suitable material:
* Small size, density
* High hardness
* High wear
* Anti-corrosion and strong
* Against strong
* High melting point
* High temperature
* Environmental

2015年8月16日星期日

Tungsten alloy used in oil drilling


Because oil drilling deeper into the formation always need better, so good formation characteristics derived, high-performance drilling equipment is very important and must weight and strong enough, in order to better balance too much upward resistance and enhance the downward momentum ʱ?? In fact, it must act as a counterweight of the entire apparatus.
tungsten alloy round bar is the best material for the manufacture of drilling equipment. The device must be heavy enough to enter barite mud, and hard to in this harsh environment, sufficient to resist the water pressure. Most designs are highly machined sensor requirements and positioning. Mechanical properties are large parts of the operation of these play a key role.
Due to the high density Tungsten Round Plates 18.5g / cm3, hardness up to 36 HRC, wear resistance, impact resistance, and durability make Tungsten Alloy Radiation Protection become a drill ground, the best material for oil and gas equipment. Here special mechanical properties has exceeded a lot of big parts.

2015年8月6日星期四

Tungsten based heavy metal alloys

Tungsten heavy alloys are mainly used in aerospace gyroscope rotor counterweight, shock absorbers; conventional weapons, armor-piercing bomb core; radiation protection shielding devices and components; machinery used die casting, flywheel and automatic watches pendulum, etc. ; electrical equipment contacts and electrodes.

2015年8月3日星期一

Tungsten alloy Cubes

Tungsten alloy block is a block of tungsten alloy products, with high density, compressive strength is good, oxidation resistance, good electrical conductivity, thermal conductivity and corrosion resistance and high density (density at 16 g / cm3 to 18.5g / cm3 ), much higher than nickel, titanium, lead. Tungsten alloy block there is good tensile strength, thermal expansion coefficient and a large elastic coefficient. In the military used to do piercing penetrator weight filler material and a variety of other pieces.

2015年7月31日星期五

Tungsten alloy plating

Tungsten alloy radiation shielding reason why performance is so superior is because tungsten alloy plating resulting coating is a new alloy, plated amorphous structure, after different heat treatment process can be transformed into an amorphous or nanocrystalline mixed nanocrystalline structure, by the State authority, the alloy has good abrasion resistance, good acid, alkali, salt spray resistance, and excellent high temperature oxidation resistance, and the base material has good adhesion.